products / bird barrier

Bird Spikes provides effective and humane control for pest birds and climbing animals on all types of surfaces. These spikes are commonly used by private homes as well as public buildings because they create an unappealing and unstable environment for birds.

KK spikes are made from a composite of stainless steel and UV stabilized plastic. KK spikes are also easy to install with just glue and/or screws.

SOME RECENT PROJECTS

Sept 2011: FACTORY - A pharmaceutical factory based near Hydrabad wanted a solution to reduce/remove nuisance caused by pigeons within the manufacturing area. We are supplying our spikes for preventing pigeons from roosting on process equipment. The total length is approx 300 running ft.
Aug-Sept 2011: HOTEL - A hotel located in Agra wanted a solution to reduce/remove nuisance caused by pigeons in the entry foyer. We are currently installing our spikes over an approximate length of 500 ft
July-Aug 2011: INSTITUTIONAL/RESIDENTIAL - An embassy located in New Delhi wanted a solution to reduce/remove nuisance caused by pigeons. We installed our spikes over an approximate length of 1500 ft
July 2011: RESIDENTIAL - A house spread over 1000 sq-yds located in a super premium area of New Delhi wanted a solution to reduce/remove nuisance caused by pigeons. We installed our spikes over an approximate length of 1000 ft

June 2011: HOTEL - A newly constructed luxury hotel in NCR required a product to deter pigeons from siting on window ledges and other areas. We installed our spikes over an approximate length of 1000 ft.

SPECIFICATION

Overall dimensions: 13" long, 6" wide, 5" high, and covers upto 7" surface
Rust proof Stainless steel 304 wires
Each 1 foot strip consists of 20 flat tipped points
Base is made from Virgin UV stabilized polycarbonate plastic
Easily and quickly installs with available mounting hardware or glue

APPLICATIONS

On all types of surfaces, e.g., window sills, air conditioners, security cameras, solar panels, I-beams, satellite dish, post/poles, etc.

BIRD SPIKE SPACING

QUANTITY ESTIMATION

SINGLE EXPOSED
Surface Depth	Rows Required
0 to 7 inches	1
7 to 14 inches	2
14 to 21 inches	3
21 to 28 inches	4
For each additional 7" add 1 row

DOUBLE EXPOSED
Surface Depth	Rows Required
0 to 6 inches	1
6 to 13 inches	2
13 to 20 inches	3
20 to 27 inches	4
For each additional 7" add 1 row

INSTALLATION

Preparation - Clean the surface on which the spikes will be installed thoroughly.
Plan & Layout - Properly mark where the spikes will be placed
Install
- Overhang the first strip about 1/2 inch at the end of the surface
- Install the next strip flush with the first strip. Use the alignment notch at the end of the strips for proper alignment. Do not leave gaps between the strip.Use the quick part seam to make adjustments to the length.