The Macroza Wall Chasing Machine markes exceptionally light and easy work of chasing in walls or partition walls for water hesting snd electrical installation TV...Etc.

The most powerful in the market - its 2.4 HP motor allows you to work with any type of brick (solid or hollow), or cement blocks.

Times Saver how long does it takes you to cut a chase in cement in cement block walls ? User of the MACROZA wall chasing machine can be it in less than 20 second /metre.

DOES NOT BREAK OR DESTROY-Have you calculated the cost of breakage cauused by hand cutting? Compared with conventional methods the MACROZA will save you more than 80% in the time and materials.

NO MORE DUST- THE Macroza wall chasing machine’s slow cutting speed , does not grind the material out in minute pieces , so avoiding dust not need any vacuum cleaner as the diamond – disk cutter do.
MORE METERS … LESS FATIGUE – No more chopping out with a cold chisel means you can cut many more meters and feel less tired ! its out put can be up to 1.000 liner metre per day in hollow bricks and 450 meters in cement blocks and 450 metres in cement block and 450 metres in cement blocks.

IT IS SUSTAINED BY IT SELF TO THE WALL - due to exclusive design, once the milling cutter is nside the wall the operator must only push and guide the machine . so during work you do do not have to sustain its weight

BUILD TO LAST – Its simply robost construction makes it ideal for the rigorus work of opening chases , without break down . the milling cutter has a life of up to approximately 18000 meters

TECHNICAL DATA

ELECTRICAL
Moror	Single Phase
Voltage	230V-AC
Current at Full Load	2200W-9Amp
Frequency	50/Hz
DIMENSIONS
Weight	7.5 Kg
Cutting Depth	25/30/35/45 mm.
Cutting width	15/25/30 mm
Cutter speed	1.000 r.p.m
MATERIALS
Body	Cast Aluminium
Handle	Nylon
Cutter teeth	Tungsten